Firmware Updates - dBTechnologies VIO-S118 Bedienungsanleitung

7. FIRMWARE UPDATES

IT IS very important to keep product firmware updated to the latest version to ensure full performance. Please
check site http://www.dbtechnologies.com for updates under section "DOWNLOADS" periodically.
1. Download and install on your PC the USB BURNER MANAGER under the
2. Download the .zip file of the latest firmware in the "DOWNLOADS" section of your product.
3. Connect the product to the PC using a USB cable (not provided) with a suitable connector type (see this detail
in the FEATURES OF THE AMPLIFICATION AND CONTROL SECTION
4. In the top right corner of the USB BURNER MANAGER screen, select "File Opening".
5. Select the file containing the previously downloaded firmware.
6. Follow the operations shown on the screen.
7. Click "UPDATE".
VIO-S118
60
RDNet
Expansion Card
12 PUSH 10
Remote
Preset Active
Active
Link
Data In
4
Delay [ms] Polarity
.0
0
.9
9 1 .1
8 2 .8 .2
.7 .3
7 3
.4
4
6 .6
.5
5
When light is on, delay and polarity controls are bypassed
14
USB Data Service Cardioid preset
Analog Balanced Audio
RDNet
Expansion Card PUSH
Remote PUSH PUSH
Preset Active
Active
Link
Data In Data Out Input Link / Xover Out
Delay [ms] Polarity System Test
0 .0
9 1 .9 .1
8 2 .8 .2 0° 180° Xover [Hz]
7 3 .7 .4 .3 60
6 5 4 .6 .5 Push and Hold to test Service / User Full range
When light is on, delay and polarity controls are bypassed Fullrange
Active Status 110
100 90
Limiter Sub Attenuation
USB Data Service Cardioid preset Signal -6
Mute/Prot -9 dB
-12 dB
Ready -18 dB
-24 dB
Mute
DESIGNED & DEVELOPED IN ITALY
AUTO-RANGE MAINS INPUT
220-240V~ 50-60Hz 3,4A
100-120V~ 50-60Hz 6,8A
MAINS FUSE
220-240V~
(T5A L 250V~)
(T10A L 250V~) 100-120V~
(REPLACE FUSE WITH
SAME RATINGS) (REMPLACER LE FUSIBLE
AVEC LE MÊME TYPE)
AUTO-RANGE
17
MAINS INPUT
220-240V~ 50-60Hz 3,4A
100-120V~ 50-60Hz 6,8A
MAINS FUSE
220-240V~
(T5A L 250V~)
100-120V~
(T10A L 250V~)
(REPLACE FUSE WITH
SAME RATINGS)
(REMPLACER LE FUSIBLE
AVEC LE MÊME TYPE)
Analog Balanced Audio
PUSH
11 1
PUSH E
Data Out
Input
5
13
System Test
0°
180°
Push and Hold to test
9
6
Status
Active
Limiter
Signal
Mute/Prot
Ready
IN ITALY
DESIGNED & DEVELOPED
"SOFTWARE &
chapter).
Link
Xover
LPF
70
75
80
85
dB dB -3
-2 dB
-1 dB
dB 0
This device complies with part 15 of the
Operation is subject to the following two FCC Rules.
conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause
undesired operation.
Via Brodolini, 8 Località Crespellano AEB INDUSTRIALE S.R.L.
40053 VALSAMOGGIA (BO) - ITAL Y
RISK OF ELECTRICAL SHOCK "CAUTION"
DO NOT OPEN
"ATTENTION"
RISQUE DE CHOCH ELECTRIQUE NE PAS OUVRIR
MAINS LINK
220-240V~ (12,6Amax) 2900Wmax
100-120V~ (13,2Amax) 1500Wmax
MAINS LINK
220-240V~ (12,6Amax) 2900Wmax
100-120V~ (13,2Amax) 1500Wmax
15 16
English
2
E
Link / Xover Out
7 7
Link
Xover
Xover [Hz] LPF
8
60
Service / User Full range 70
Fullrange 75
80
110
100 85
90
Sub Attenuation
3
-6
dB
-9 -3
dB dB
-12 -2
dB dB
-1
-18 dB
dB
0
-24 dB
dB
Mute
CONTROLLER" section.
Cod. 420120259 REV. 1.0