Mechanics; Upper Side - dBTechnologies VIO-S118 Bedienungsanleitung

English

MECHANICS

The subwoofer ergonomics and the quick assembly in (flown of stack) line arrays are guaranteed by:

UPPER SIDE

A) Front retractable brackets for installation of a second ViO-S118 (or of a DRK-210 fly-bar in flown configuration).
B) Rear retractable brackets for installation of a second ViO-S118 (or of a DRK-210 fly-bar in flown configuration,
or of GSA-ViOL210 accessory in stack configuration).
C) Pins for fastening the retractable brackets in open/closed position [A and B].
LOWER SIDE
D) Front anchoring system to a second ViO-S118 (or another flown ViO-L210 line array module)
E) Rear anchoring system to a second ViO-S118 (or to FSA-ViOL210 accessory in flown configuration).
TOP
F) hooking holes for fastening of DRK-210 fly-bar in stack configuration
G) threaded hole for installation of one speaker on pole (M20 thread)
H) handles (2 per side) for ease of transport
The VIO-S118 modules are also equipped with 1 rain
cover [L] on the rear side, in order to protect the
amplifier [I] from water and allow operation even
in critical weather conditions. The rain cover will
be no longer shown in the following drawings, for
simplicity.
For further information regarding the fly-bar (see the
ACCESSORIES section) and the assembly accessories,
please refer to the relevant manual.
VIO-S118
Cod. 420120259 REV. 1.0
38