Dometic RM5310 Montageanleitung Seite 36

Installing the refrigerator
6.4 Mounting the ventilation grilles
LS100
No. in
fig. 7, page 4
1
2
3
4
LS200
No. in
fig. 8, page 5
1
2
3
➤ Seal the installation frame in a water-proof manner (fig. 9, page 5).
➤ Fit the installation frame and bolt it tight (fig. 0, page 5).
➤ Fit the ventilation grille and lock it (fig. a, page 5).
Only for LS100
➤ Fit the insert for exhaust gas routing (fig. b, page 5).
6.5 Mounting the exhaust gas routing (fig. c, page 6)
➤ Plase the T-piece (1) on the adapter (2) and the exhaust gas pipe (3)
➤ Fix the T-piece, adapter and exhaust gas pipe in place with a bolt (4).
➤ Make sure that the heat distributor (5) is in the correct position.
➤ Push the exhaust gas pipe with the cover plate (7) through the opening in
the installation frame provided for that purpose (6).
➤ Connect the exhaust gas pipe and the cover plate with the T-piece (1).
➤ Shorten the exhaust gas pipe (7) to the right length if necessary.
36
Description
Installation frame
Ventilation grille
Insert for exhaust gas routing
Winter cover
Description
Installation frame
Ventilation grille
Winter cover
RM5310, RM5330, RM5380
EN