22 7.1 Place Change; Temporary Decommissioning; Technical Data; 22 8.2 Dimensions And Weights - Sicam JUMBO TCS 52 ANW MAXI Originalbetriebsanleitung

en �4 | ��M�� T�S �� ��� M��� | Decommissioning
7. Decommissioning
7.1 Place change
Procedure:
1. Disconnect electrical connection.
2. Follow what shown for first start up (see chap. 4.2).
i
In case of sale or transfer of
JUMBO TCS 52 ANW MAXI, all the documents inclu-
ded in the consignment volume has to be integrally
handed over together with the equipment.
7.�

Temporary decommissioning

If the JUMBO TCS 52 ANW MAXI is going to be stopped
for a limited period of time or if the equipment is not
being used for other reasons, always disconnect the
network plug from its socket!
It is suggested to clean accurately the
JUMBO TCS 52 ANW MAXI, also its tools and accessori-
es, and carry out a protection treatment (e.g. spraying
of a thin oil film).
7.� Disposal
¶
Disconnect the JUMBO TCS 52 ANW MAXI from the
mains tension and take off the power supply cable.
¶
Oil are water pollution risk fluids and have to be
disposed of in accordance with the rules in force.
¶
Disassemble the JUMBO TCS 52 ANW MAXI, order
the materials according to the category it belongs to
and dispose of them according to the rules in force.
��M�� T�S �� ��� M��� complies to the
rules of the European directive �00�/96/�E
(directive on the disposal of electrical and
electronic waste).
Electric and electronic devices which are out
of order, together with their cables, accesso-
ries, accumulators and batteries, have to be
disposed of separately from household waste.
¶
For disposal of such products, use the
available return and collection systems.
¶
The correct disposal of the
JUMBO TCS 52 ANW MAXI makes it possi-
ble to avoid environmental damage and to
put at no risk the life of people.
|
1 695 301 960 2011-07-16
8.

Technical data

8.1 ��M�� T�S �� ��� M���
Function
Maximum noise level
Working hydraulic pressure
Power supply tension
8.� Dimensions and weights
Function
JUMBO TCS 52 ANW MAXI (A x L
x P)
Net weight
Gross weight
8.� Reach
Function
Tire width
Maximum tire diameter
Maximum tire width
Specifications
75 dB
20 – 130 bar
depending on the cho-
sen tension (see iden-
tification plate)
Specifications
1750 x 2600 x 1750 mm
947 kg
1113 kg
min / max
14"– 42" (with optional ex-
tension up to 56")
2300 mm
1300 mm
Sicam srl società unipersonale