Ser Information; Important Notes; Safety Instructions; Electromagnetic Compatibility (Emc) - Sicam JUMBO TCS 52 ANW MAXI Originalbetriebsanleitung

en �� | ��M�� T�S �� ��� M��� | �ser information
2. User information
�.1 �mportant notes
Important information on copyright, liability and war-
ranty provisions, as well as on equipment users and
company obligations, can be found in the separate
manual "Important notes on and safety instructions for
Sicam Tire Equipment". These instructions must be care-
fully studied prior to start-up, connection and operation
of the JUMBO TCS 52 ANW MAXI and must always be
heeded.
�.�

Safety instructions

All the pertinent safety instructions can be found in the
separate manual "Important notes on and safety instruc-
tions for Sicam Tire Equipment". These instructions must
be carefully studied prior to start-up, connection and
operation of the JUMBO TCS 52 ANW MAXI and must
always be heeded.
�.� Electromagnetic compatibility (EM�)
The JUMBO TCS 52 ANW MAXI is a class A product as per
EN 61 326.
|
1 695 301 960 2011-07-16
3.

Product description

�.1

Designated use

JUMBO TCS 52 ANW MAXI is a modern tire changer for
mounting and demounting of truck, bus, industrial ve-
hicles, agricultural and earthwork vehicles tires.
i
JUMBO TCS 52 ANW MAXI has to be used exclusively
for the specified purpose and only in the functioning
scope shown in these instructions. Any other use
different from that specified has to be considered
improper and therefore not allowed.
i
The manufacturer is not liable for any damage
caused by improper use.
�.�

Requirements

i
JUMBO TCS 52 ANW MAXI has to be installed on an
even surface made of concrete or similar materials,
and has to be firmly anchored. A pneumatic connec-
tion is requested.
�.�

Delivery specification

Denomination
JUMBO TCS 52 ANW MAXI
Bead lifting lever
Rim pliers
�.4

Special accessories

Denomination
Nylon protections
Clamps (2 pieces)
Bead wires and clamps lever
Tubeless roller
56" extension for locking jaws
Caterpillar wheels extensions
Central hole Ø 80 adaptor
Fitting devices for rims with wheel weights
�rder code
1 695 300 094
1 695 300 099
�rder code
1 695 400 139
1 695 300 098
1 695 102 683
1 695 300 102
1 695 301 710
1 695 301 712
1 695 301 781
1 695 301 782
Sicam srl società unipersonale