Herunterladen Inhalt Inhalt Diese Seite drucken

Electrical Connection; Check Rotation Direction; Perating Instructions - Sicam JUMBO TCS 52 ANW MAXI Originalbetriebsanleitung

Vorschau ausblenden Andere Handbücher für JUMBO TCS 52 ANW MAXI:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 52
4.�

Electrical connection

1. Check the correspondence of the mains tension and
the tension shown on the identification tag.
2. Ask a qualified electrician to mount a connection
plug for single-phase or (depending on the tension
you have ordered ) three-phase current (see the
electrical connections diagram inside the electrical
panel).
i
The costs of arranging a mains protection device for
the plug are borne by the customer.
3. Protect the JUMBO TCS 52 ANW MAXI according to
specific national rules.
4.4
�heck rotation direction
�arning - malfunctioning danger!
JUMBO TCS 52 ANW MAXI turns in counter-
clockwise direction.
Turn off the main switch.Check the manual
section dedicated to functioning anomalies
to find the cause (see chap. 5.3)
For a correct functioning of JUMBO TCS 52 ANW MAXI
it is extremely important that after having connected
and started the machine the rotation direction corres-
ponds to that shown by the arrow on the control unit
motor.
Fig. 2:

Check rotation direction.

Sicam srl società unipersonale
�perating instructions | ��M�� T�S �� ��� M��� | ��
5.
Operating instructions
�arning - tire or rim damage danger!
Excessive pressure can e. g. result in cracks
(on the inside/outside) of the tire. The rim
can be scratched or deformed.
Read the Wdk publications available in
German and English! (www.wdk.de: moun-
ting/demounting instructions – criteria
catalogue)
Inner temperature of the tire must be at
least 15 °C (only in case of RFT/UHP).
Read the Wdk publications available
in German and English! (www.wdk.de:
mounting/demounting instructions – tire
overheating)
Adjust pressure to the type of tire.
Use the plastic protections on the types of
rim that need it.
!
Before demounting or mounting operations it is ext-
remely important to collect all the rim and tire data.
In this way it will be possible to know in advance the
mounting, the pressure and the required accesso-
ries!
��M�� T�S �� ��� M��� | ��
1 695 301 960
| ��
en
|
2011-07-16

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis