Troubleshooting - IKEA KYLANDE Gebrauchsanleitung

ENGLISH

Troubleshooting

Warning! Refer to Safety
chapters.
What to do if...
Problem
The appliance does not op-
erate.
The appliance does not op-
erate.
The appliance does not op-
erate.
The appliance is noisy.
Acoustic or visual alarm is
on.
Acoustic or visual alarm is
on.
Acoustic or visual alarm is
on.
A rectangular or square
symbol is shown instead of
numbers on the Tempera-
ture Display.
The lamp does not work.
The lamp does not work.
Possible cause
The appliance is switched
off.
The mains plug is not con-
nected to the mains socket
correctly.
There is no voltage in the
mains socket.
The appliance is not sup-
ported properly.
The cabinet has been re-
cently switched on or the
temperature is still too
high.
The door is left open.
The temperature in the ap-
pliance is too high.
Temperature sensor prob-
lem.
The lamp is in stand-by
mode.
The lamp is defective.
Solution
Switch on the appliance.
Connect the mains plug to the
mains socket correctly.
Connect a different electrical
appliance to the mains socket.
Contact a qualified electrician.
Check if the appliance stands
stable.
Refer to "High Temperature
Alarm".
Close the door. Refer to "Door
Open Alarm".
Contact a qualified electrician
or contact the nearest Author-
ised Service Centre.
Contact the nearest Author-
ised Service Centre (the cool-
ing system will continue to
keep food products cold, but
temperature adjustment will
not be possible).
Close and open the door.
Contact the nearest Author-
ised Service Centre.
16