Playing From Headset Output Socket Of Tv Set (Aux 1 Or Aux 2); Playing From Units With Headset Socket (Aux 1 Or Aux 2); Playing From Units With Cinch Connection Sockets (Aux 1 Or Aux 2); Playing Music Cable-Free With Apple Airport Express - Hulsta now! Soundpaneel Betriebsanleitung

4.4 Playing from the headset output socket of a TV set (AUX 1 or AUX 2)
Connect the headset socket of your TV set to one of the two cinch input sockets (AUX 1 or AUX
2) on the now! Sound Panel. To do so, use a 3.5 mm or 6.3 mm stereo jack -> cinch cable.
Set the volume level of the now! Sound Panel to the level normally used and adjust the
volume of the TV set correspondingly. This prevents the volume level from being too high
when you change to a different source and the volume difference is then too great. The vo-
lume can then be set via the remote control unit of the now! Sound Panel. Please note that
headset outputs for reasons of hearing protection usually operate with a much lower volume
output level than i.e. Toslink or Cinch outputs. Therefore the achievable maximum volume of
the now! Sound Panel is respectively reduced.
4.5 Playing from units with a headset socket (AUX 1 or AUX 2)
Connect the headset socket of your source unit to one of the two cinch input sockets (AUX
1 or AUX 2) on the now! Sound Panel. To do so, use a 3.5 mm or 6.3 mm stereo jack -> cinch
cable. Set the volume level of the now! Sound Panel to the level normally used and adjust
the volume of the other source unit correspondingly. This prevents the volume level from
being too high when you change to a different source unit and the volume difference is then
too great. The volume can then be set via the remote control unit of the now! Sound Panel.
Please note that headset outputs for reasons of hearing protection usually operate with a
much lower volume output level than i.e. Toslink or Cinch outputs. Therefore the achievable
maximum volume of the now! Sound Panel is respectively reduced.
The following units with headset sockets can be connected:
Notebooks – mobile CD or DVD players – MP3 players or iPods – mobile telephones, smart
phones – transistor radios – computers (with a sound card) – games consoles
22

4.6 Playing from units with cinch connection sockets (AUX 1 or AUX 2)

Connect the cinch sockets of your source unit to one of the two cinch input sockets (AUX 1
or AUX 2) on the now! Sound Panel. To do so, use a cinch-cinch cable. Set the volume level
of the now! Sound Panel to the level normally used and adjust the volume of the other
source unit correspondingly. This prevents the volume level from being too high when you
change to a different source unit and the volume difference is then too great. The volume
can then be set via the remote control unit of the now! Sound Panel.
The following units with cinch sockets can be connected:
CD players – DVD players – Blu-ray players – tuners – computers (with a sound card) – games
consoles

4.7 Playing music cable-free with Apple AirPort Express

(not provided – available from dealers)
The Apple AirPort Express basis station allows you to receive audio/video data cable-free via
data streaming from your Mac or PC and to play it via the now! Sound Panel that is connec-
ted by cable. Connect the mini jack socket of the AirPort Express basis station to one of the
AUX inputs on the electronics unit. To do so, use a mini jack-cinch cable. Set the volume of
the now! Sound Panel to the level normally used and simply adjust the volume from your
couch via the volume bars in the display of your iPod, iPhone or iPad.
GB
23