Self Ignition Function; Actuators Function - Comelit 1952 Benutzerhandbuch

Self ignition function

The self ignition function can be used to receive images from the external unit cameras or from remote
cameras.
A self ignition command can be sent in 2 ways:
◊ Via the self ignition key: press the
◊ Via the self ignition menu: to use the function via the menu, proceed as follows:
Entrance Panels Directory
Name
Entrance 1
Entrance 2
Ingresso 3

Actuators function

The actuators function is used to activate the relay output of an IO actuator module or that of an expansion
device connected to it.
30 30
L
key to send the command to the associated camera.
Contact your installer for key confi guration
Actuators Directory
Actuator 1
Acuator 2
Acuator 3
Entrance Panels Directory
Name
Entrance 1
Entrance 2
Entrance 3
Name
Actuators Directory
Name
Actuator 1
Acuator 2
Attuatore 3