Functions - dB Technologies MOVING ONE-H Bedienungsanleitung

ENGLISH
8) "AUDIO" LUMINOUS INDICATOR
Indicates the different modes of operation of the audio signal:
OFF:
GREEN:
RED:
9) "RF" LUMINOUS INDICATOR
It is used to indicate the different modes of operation:
OFF:
FLASHING GREEN:
STEADY GREEN:
STEADY RED:
10) ANTENNAS
They are telescopic and allow the reception of the signal.
Rear
1) "MIC" OUTPUT CONNECTOR
Balanced audio output via "XLR" connector.
2) "LINE" OUTPUT CONNECTOR
Balanced or unbalanced audio output via 1/4" (6.3mm) Jack connector
3) "DC MAIN INPUT" POWER SUPPLY CONNECTOR
Allows to power the receiver via the 12Vdc power supply supplied.

2.2. Functions

Power on
Connect the power cable and press the "POWER" button on the front of the receiver. The device
will perform a fast check sequence; the receiver will be active when the display is on.
Power off
Press and hold the "POWER" button for about 2 seconds. The front display turns off.
Disconnect the power cable
The device stores the status of the last setting before shutting down; on power on it will
be automatically restored.
19
no audio signal received or very low audio level
audio signal received with normal audio level
The indicator flashes as a function of the audio signal.
audio signal received with very high audio level (peak)
The indicator turns red to indicate the trip of the internal limiter circuit, which
avoids audio signal distortion and protects the receiver from overloads.
Avoid using the system for long periods with the indicator steadily on or
flashing.
No transmitter detected
Signal detected but without code (interference)
Transmitter detected and recognized
Transmitter detected and recognized but with low battery
MOVING-ONE Diversity wireless microphone system