dB Technologies MOVING ONE-H Bedienungsanleitung Seite 21

Selection of the group
Repeatedly press the "GROUP" button until the desired channel is displayed.
Selection of the channel
Repeatedly press the "CHANNEL" button until the desired channel is displayed.
ATTENTION
Whenever you change the group, the number of the channel is reset to 0.
Automatic search
Pressing and holding the "GROUP" button for 2 sec
starts the group automatic search function. The
system scans all the groups, choosing the one with
the greatest number
interferences and the first free channel within that
group.
The display indicates this search through the
clockwise rotation of the segments of the display;
once the search is over, the number of the group
and the selected channel will be displayed.
Pressing and holding the "CHANNEL" button for 2
sec starts the channel automatic search function.
The system scans all the channels within the group
and chooses the best channel.
The display indicates this search through the
clockwise rotation of the segments of the display
relative to the channels; once the channel is found,
the corresponding number will be displayed.
ATTENTION
Do not set more than one transmitter on a single channel to avoid transmission interferences.
If multiple microphones are used, use the channels within the same group
Antennas
For a correct operation, the antennas must be fully extended and inclined at 45° toward
the outside.
Never cover the antenna during use.
of channels free of
ENGLISH
20