Maintenance; Recycling; Technical Data - SOMFY ELIXO 500 3S io Bedienungsanleitung

Elixo 500 3S io
Manual emergency unlocking (Fig. 17)
[1] Insert the key into the lock.
[2] Turn the key a quarter of a turn to the left.
[3] Turn the release handle to the right.
Do not forcibly push the gate. Hold the gate over its entire travel during manual
manoeuvres.
Locking the motorisation (Fig. 18)
[1] Turn the release handle to the left.
[2] Move the gate manually until the drive mechanism re-locks.
[3] Turn the key a quarter of a turn to the right.
[4] Remove the key.
It is essential that the motorisation is re-engaged before any new commands.

MAINTENANCE

Checks
Safety devices (cells, safety edge)
Check correct operation every 6 months (see page 3).
Backup battery
For optimum battery life, it is recommended that the main power supply be switched off and the motor operated using the battery for several cycles, three
times a year.
Replacing the battery in a Keygo io remote control (Fig. 19)
1

RECyCLING

Do not throw away your scrapped equipment or used batteries with household waste. It is your responsibility to dispose of your electronic
equipment in the relevant recycling points.

TECHNICAL DATA

Power supply
Input power
Climatic operating conditions
Somfy radio frequency
Number of memorisable channels
Remote lighting output
Copyright © 2012 Somfy SAS. All rights reserved
Standby operation
1 W controls
(Keygo io, Situo io, etc.)
2 W controls
(Keytis io, Telis io, Composio io,
etc.)
[1]
[2]
19
2
230 V - 50
8.6 W - 600 W (with 500 W remote lighting)
- 20°C/+ 60°C - IP 44
io 868 - 870 MHz
Complete/pedestrian opening control: 30
Lighting control: 4
Auxiliary output control: 4
Unlimited
230 V - 500 W
17
18
5