Sauna Heater Assembly; Minimum Clearances - Monuments IRON I Gebrauchsanweisung

Sauna heater assembly

The sauna heater has been designed for a connection voltage of 400 V AC 3N via a sauna control unit.

Minimum clearances

• The sauna cabin interior must be at least 1.90 m in height.
• Maintain at least 90 cm clearance between the upper edge of the heater and the cabin ceiling
• The side (horizontal) distances between the heater and the cabin wall and the oven protective grating, bench and
other ammable materials are stated in Fig. 1.
8
cm
• The height of the protective grating for the heater must approximately correspond to the front height of the heater
Cabin wall
Protective grating
for heater
44
cm
GB
8
cm
Fig. 1
Fig. 2
(Fig. 2).
25