Removing The Software; Running The Software; Starting The Oliboard Driver - Olivetti Oliboard 78S Benutzerhandbuch

R S
EMOVING THE
1. Select the Oliboard software in "Applications" then click "Uninstall" to start the
software removal procedure and confirm the software removal.
2. Click "YES" to start the software removal.
R S
UNNING THE OFTWARE
To run the software, you must first of all start the software driver of the whiteboard,
then if necessary perform the orientation operation before starting the whiteboard
software.

Starting the Oliboard Driver

Connect the whiteboard USB cable to the computer. Click "System" →
1.
"Applications" →"Oliboard Software" → "Driver"→"V2.1" → "Oliboard
Driver" to run the Oliboard driver.
2. After starting the Oliboard Driver, the related icon is displayed on the desktop.
3. When the Oliboard driver is run, it automatically checks the whiteboard. If an
error message appears, check the connection between the whiteboard and the
computer. Click the driver icon and select the "Reconnect" option from the
popup menu "Settings".
NOTE: After having installed the driver, it is automatically run the next time
the computer is powered on. If the computer is often disconnected to
the whiteboard, it is advisable to deactivate the automatic execution
(click on the driver icon with the right button of the mouse and
deactivate option for driver execution at login).
32
OFTWARE
OLIBOARD - Interactive Whiteboards