Installing The Oliboard Software; Installing The Usb Software Driver; Removing The Oliboard Software - Olivetti OLIBOARD-T Benutzerhandbuch

Installing the Oliboard Software

1. Click .
2. Choose the language you want to install.
3. Select the installation path. The software installation starts.
4. When installation completes a message appears; click on "Finish".

Installing the USB Software Driver

Normally it is not necessary to execute this procedure if the "Express installation"
has already been performed.
1. Click
cable (optical USB touch driver)
2. Confirm installation with "Next" (in case of request, select the installation path).
3. End the installation by clicking the "Finish" button.
R O
EMOVING THE LIBOARD
Click on "Start" → "Control Panel" → "Add or Remove Programs", select
"Oliboard" then click on "Add/Remove".
Select the option for removing all the features installed and follow the instructions
shown on the screen.
Alternatively, insert the software disk, click on the Oliboard program logo and run
the software removal guide following the instructions on the screen.
At the end of removal, it is recommended that you restart the computer.
OLIBOARD - Interactive Whiteboards
"Install USB Driver" to install the driver for the USB
S
OFTWARE
11