Running The Software; Starting The Oliboard Driver - Olivetti Oliboard 78S Benutzerhandbuch

R S
UNNING THE OFTWARE
The whiteboard cable must be connected to the USB port of the computer.
To run the software, you must first of all run the whiteboard software driver, then
perform the orientation operation if necessary before finally starting the whiteboard
software.

Starting the Oliboard Driver

Click "Applications" → "Oliboard" → "Oliboard Driver" to run the Oliboard
1.
Driver.
2. When the Oliboard Driver starts, the related icon appears on the panel in the top
right corner of the desktop:
3. When the driver starts, the whiteboard runs a connection check. If an error is
encountered, make sure that the whiteboard cable is connected correctly
between the computer and the whiteboard. Click on the driver icon and select the
"Reconnect" option from the popup menu.
NOTE: After having installed the driver, it is automatically run the next time
the computer is powered on. If the computer is often disconnected to
the whiteboard, it is advisable to deactivate the automatic execution
by means of the Startup Applications Preferences panel to avoid an
error message appearing the next time the computer is powered on
indicating that no whiteboard is connected.
24 OLIBOARD - Interactive Whiteboards