System Requirements - Olivetti Oliboard 78S Benutzerhandbuch

S R
YSTEM EQUIREMENTS
The whiteboard must be connected to a computer that displays images on the
whiteboard by means of a video-projector.
CPU: 1GHz
RAM: 512 MB
USB port (for connecting
whiteboard)
VGA port (female, type SUB-D15)
for connecting the video-
Hardware
projector.
Configuration
NOTE: some computers (e.g.
MAC) are not equipped with this
type of port. In this case you
must use an adapter (not
supplied with the whiteboard
and projector).
Windows 2000, XP, Vista, 7
Linux Ubuntu7.0/8.0
Software
(I386/AMD64)
Configuration
Mac OS X V10.4 and later
(Intel platform)
Recommended Computer Setup:
1) To obtain the best picture on the whiteboard, the format of the computer video
output (its resolution) and of the projector must be the same as that of the
whiteboard.
Therefore, for whiteboards in format 4/3 (Oliboard 78S and Oliboard 78D), it is
recommended to use an output resolution corresponding to the 4/3 format (e.g.
1024x768 or 800x600).
For a whiteboard in format 16:9 (Oliboard 95D), it is recommended to use an output
resolution corresponding to the 16:9 format (e.g. 1280x800).
2) While using the whiteboard, the computer connected could enter "stand-by" mode.
To avoid this, it is advisable to deactivate the screen-saver and energy-saving
functions.
2
Minimum Configuration Recommended Configuration
CPU: 1.7 GHz or higher
RAM: 1 GB or higher
USB port (for connecting
whiteboard)
VGA port (female, type SUB-D15)
for connecting the video-
projector.
NOTE: some computers (e.g.
MAC) are not equipped with this
type of port. In this case you must
use an adapter (not supplied with
the whiteboard and projector).
Windows 2000, XP, Vista, 7
Linux Ubuntu7.0/8.0 and later
(I386/AMD64);
Mac OS X V10.4 and later
(Intel platform)
OLIBOARD - Interactive Whiteboards