Navigating The Menu; Set Wake-Up Profiles - Philips HF3650 Handbuch

English
10
Radio presets*
Snooze/Midnight Light
Display

Navigating the menu

Set wake-up profiles

Set wake-up profile
Duration of the wake-up profile
*HF3653 does not feature a radio.
On the display you can select and set the wake-up profile, bedside light,
settings, sound (source) or the unwind program.
Note: All your personalized settings and profiles will be permanently stored
in the memory, they will not be erased by removing the adapter from the
electrical outlet. You can change all settings at any time, the last setting will
be stored.
Note: If the display is blank, move your hand towards the lower part of the
Sleep & Wake-up Light to show the display menu. You will see the menu
icons.
In your wake-up profile you can set the time, the maximum light intensity
and the type of wake-up sound you prefer.
Note: Press and hold the alarm button for 4 seconds to deactivate all set
alarms at once. Press and hold 4 seconds to activate the alarms again.
You can set two different wake-up profiles. For each profile you can set the
time, light intensity, wake-up curve duration, the type of sound and volume.
The default duration of the wake-up curve (brightness increase to the set
maximum light intensity) is 30 minutes. The duration can be changed to your
preference.
Alarm
Breathing rhythms