Using The Sleep & Wake-Up Light As A Bedside Lamp; Midnight Light; Settings - Philips HF3650 Handbuch

English
12
Using the Sleep & Wake-Up Light as a bedside
lamp

Midnight Light

Settings

You can use the Sleep & Wake-Up Light as a bedside lamp.
Press the bedside lamp button on the display to switch on the bedside
lamp.
Note: You can increase and decrease the brightness intensity. You can select
a brightness between 1 (low) to 25 (high). The default brightness setting is 18.
To switch it off press the cross button in the menu.
Tip: When the light is on, you can also turn off the light with a single tap on
top of the Sleep & Wake-Up Light. All active programs will stop. Set alarms
are still active.
If you wake up during the night, you can tap the top the Sleep & Wake-Up
Light to activate a dim light. This dim, subtle orange light provides you with
just enough light to find your way in the dark. Switch off the Midnight Light
by tapping the top of the Sleep & Wake-Up Light again.
Note: The Midnight Light cannot be activated directly when the main light is
already on. In that case, first tap to de-activate the main light.Second, tap to
activate the Midnight Light.
In this menu you adjust the clock time, the audio feedback and the display
brightness of the Sleep & Wake-Up Light.
Note: Press and hold the settings button for 5 seconds to open a new menu,
in which you can select DEMO mode (accelerated wake-up curve) or
VERSION (firmware version of the appliance).