Listening To Radio* Or Your Own Music - Philips HF3650 Handbuch

English
14

Listening to radio* or your own music

Radio*
Music via Auxiliary (AUX) socket
Tip: When the radio or music is on, you can turn off the sound with a single
tap on top of the Sleep & Wake-Up light. All active programs will stop. Set
alarms are still active.
You can listen to the FM radio with the Sleep & Wake-Up Light. If you have
set the radio function in the setup wizard, it shows the selected radio
station. You can manually change the radio station by selecting the FM
frequency of another radio station.
Tip: Make sure to unwind the antenna fully and move it around until you
receive the best reception.
You can preset 5 radio stations. First, select a radio station by setting the the
FM frequency. Press and hold the double arrow button to automatically
search for the next radio station.
After setting a radio station, you can easily add another preset radio station
by selecting the toggle button. With this process, you can preset 5 radio
stations.
Set the preferred volume. To save the radio frequency, select the check
mark button.
*HF3653 does not feature a radio.
You can use the Sleep & Wake-Up Light as a speaker for music by
connecting a music playing device (for instance your mobile phone) to the
AUX socket.
Note: You cannot wake up to music from an AUX connected device.
If the sound is not loud enough if you have set the Sleep & Wake-Up Light to
maximum volume, increase the volume of your music playing device.
If the sound is too loud or distorted at low volume settings of the Sleep &
Wake-Up Light, decrease the volume of your music playing device.
Note: Press and hold the music note button for 5 second to
activate/deactivate the sound via the menu. You can also deactivate the
sound by tapping the top of the Sleep & Wake-Up Light.
Note: You need an AUX cable to connect the Sleep & Wake-Up Light to a
music playing device.