Storage Locations Voice01 - Voice20; Deleting A Message; Message Sequence; Programming A Message Sequence - Monacor PA-1120DMT Einbau- Und Bedienungsanleitung

M1 M2 M3 M4 M5 M6
➄
Connection for remote control
6.2.3 Storage locations Voice01 – Voice20
To replay a message from one of the storage
locations "Voice01" to "Voice20":
1) Press the button MENU (10) . The display will
show:
Mode Set
Time
2) Press the button UP (12) or DN (11) repeatedly
until
Voice
3) Press the button ENTER (6) . The display will
now show:
Choose
Play
4) Press the button ENTER . The display will now
show:
PlayBack
Voice:01
5) Use the button UP or DN to select the message
desired (
01
6) Press the button START/ STOP (14) or ENTER .
will appear on the first line of the
Playing
display .
7) Press the button START/ STOP or ENTER to stop
the replay .
PlayBack
line; a different message can be selected for
replay ( ☞ step 5) .
20
LED
+3,3 V
appears on the lower display line .
to ) .
20
will appear on the first

6.3 Deleting a message

To delete a message from the storage locations
Voice01 to Voice20 without recording a new
message:
1) Press the button MENU (10) . The display will
show:
Mode Set
Time
2) Press the button UP (12) or DN (11) repeatedly
until appears on the lower display line .
Voice
3) Press the button ENTER (6) . The display will
now show:
Choose
Play
4) Use the button UP or DN to select the option
on the lower line .
Delete
5) Press the button ENTER . The display will now
show:
Delete
Voice:01
6) Use the button UP or DN to select the message
to be deleted (
01
button ENTER to confirm .
The message will be deleted and the menu will
be exited . To delete further messages, start with
step 1 again .
Note: Messages that are stored on the storage loca-
tions M1 – M6 can only be deleted by a new recording
( ☞ chapter 6 .1 .1) .

6.4 Message sequence

A sequence of up to 20 stored messages may be
programmed and manually replayed in any order .

6.4.1 Programming a message sequence

1) Press the button MENU (10) . The display will
show:
Mode Set
Time
2) Press the button UP (12) or DN (11) repeatedly
until appears on the lower display
RECALL
line .
3) Press the button ENTER (6) . The display will
now show:
RECALL
PGM Play
4) Use the button UP or DN to select the option
on the lower line .
PGM Edit
to ) and then press the
20