Hilti WSC 85 Bedienungsanleitung Seite 23

4. Tighten the clamping screw.
5.6 Fitting / adjusting the rip fence (parallel guide)
1. To adjust the cutting width, slacken the clamping screws.
2. Push the parallel guide into the base plate as far as desired.
3. Tighten the clamping screws.
5.7 Switching the power tool on
1. Press the safety lock.
2. Press the on/off switch.
5.8 Sawing along a line
Note
Secure the workpiece to prevent movement.
Position the workpiece so that the saw blade is free to rotate beneath it.
Check to ensure that the on/off switch on the product is in the "off" position.
Position the forward section of the saw's base plate on the workpiece but do not bring the blade into
contact with the workpiece.
1. Bring the front edge of the base plate into contact with the workpiece.
2. Switch the power tool on. → page 17
3. Guide the product along the cutting line on the workpiece at a suitable speed.
5.9 Switching the power tool off
▶ Release the on/off switch.
6 Care and maintenance
6.1 Checks after cleaning and maintenance
Note
After cleaning or maintenance, check that all safety devices are fitted and that they function faultlessly.
▶ To check the pivoting guard, open the guard fully by moving the guard operating lever.
◁ The pivoting guard must close quickly and completely when the guard operating lever is released.
6.2 Cleaning the guard
1. Remove the saw blade. → page 15
2. Clean the parts of the guard carefully with a dry brush.
3. Use a suitable tool to remove deposits or cuttings from the inside surfaces of the parts of the guard.
4. Fit the saw blade. → page 16
7 Disposal
Most of the materials from which Hilti tools and appliances are manufactured can be recycled. The
materials must be correctly separated before they can be recycled. In many countries, your old tools,
machines or appliances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti representative
for further information.
▶ Disposal of electric tools or appliances together with household waste is not permissible.
8 Manufacturer's warranty
▶ Please contact your local Hilti representative if you have questions about the warranty conditions.
Printed: 07.09.2017 | Doc-Nr: PUB / 5071333 / 000 / 04
6
English 17