Safety Notes; Important Notes; Functions - Trix H0 212 Series Bedienungsanleitung

Safety Notes

• This locomotive is only to be used with an operating
system designed for it.
• Analog max. 15 volts DC, digital 22 volts AC.
• This locomotive must never be supplied with power from
more than one power pack.
• Pay close attention to the safety notes in the instructions
for your operating system.
• The feeder track must be equipped to prevent inter-
ference with radio and television reception, when the
locomotive is to be run in conventional operation. The
611 655 interference suppression set is to be used for this
purpose. The interference suppression set is not suitable
for digital operation.
• WARNING! Sharp edges and points required for operation.
• Do not expose the model to direct sunlight, extreme
changes in temperature, or high humidity.

Important Notes

• The operating instructions and the packaging are a com-
ponent part of the product and must therefore be kept as
well as transferred along with the product to others.
• Please see your authorized Trix dealer for repairs or
spare parts.
• Maintenance, servicing, and repairs may only be done by
adults.
• The warranty card included with this product specifies
the warranty conditions.
• www.maerklin.com/en/imprint.html

Functions

• This model is designed for operation with H0 2-rail
DC systems (track according to NEM standards) with
conventional DC power packs.
• This locomotive comes equipped with a Trix
connector for digital operation and can have
the Märklin locomotive decoder 60942/60947
installed in it.
• Trix motor vehicles must not be operated on digital
systems without an built-in engine decoder (Motor can
be damaged !).
7