Herunterladen Inhalt Inhalt Diese Seite drucken

Safety Notes; Important Notes; Functions - Märklin 49967 Bedienungsanleitung

Werkstatt-gerätewagen
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 4

Safety Notes

• This car is to be used only with an operating system
designed for it (Märklin AC, Märklin Delta,
Märklin Digital, DCC or Märklin Systems).
• Use only switched mode power supply units and trans-
formers that are designed for your local power system.
• This car must never be supplied with power from more
than one transformer.
• Pay close attention to the safety notes in the
instructions for your operating system.
• Do not expose the model to direct sunlight, extreme
changes in temperature, or high humidity.
• WARNING! Sharp edges and points required for operation.
• The LEDs in this item correspond to Laser Class 1 accord-
ing to Standard EN 60825-1.

Important Notes

• The operating instructions and the packaging are a com-
ponent part of the product and must therefore be kept as
well as transferred along with the product to others.
• Please see your authorized Märklin dealer for repairs or
spare parts.
• The warranty card included with this product specifies
the warranty conditions.
• Disposing: www.maerklin.com/en/imprint.html
6

Functions

• Recognition of the mode of operation: automatic.
• Mfx technology for the Mobile Station / Central Station.
Name set at the factory: WerkGerätewagen
• Address set at the factory: MM 78 / DCC 03
• Setting the parameters (address, volume):
with the Control Unit, Mobile Station, Central Station.
• Various controllable functions.
• In analog operation, only the interior lighting and the
marker lights 1 will be on.
Note:
The digital protocol with the most possibilities is the highest
order digital protocol. The sequence of digital protocols in
descending order is:
Priority 1: mfx
Priority 2: DCC
Priority 3: MM
If two or more digital protocols are recognized in the track,
the decoder automatically takes on the highest value digital
protocol. For example, if mfx & MM are recognized, the
mfx digital protocol is taken on by the decoder. Individual
protocols can be deactivated with Parameter CV 50.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis