Electrolux FI 5004 NA+ Benutzerinformation Seite 6

www.electrolux.com
6
2.4 Temperature indicator
During normal functioning the Tempera-
ture indicator shows the temperature set-
ting.
Difference between the tempera-
ture inside the compartment and
temperature setting is normal. Es-
pecially when:
• a new setting has recently been
• the door has been left open for
• warm food has been placed in
2.5 Excessive temperature
alarm
In the event of an abnormal temperature
rise inside the freezer (e.g. power cut)
Alarm light will start to flash and a buzzer
will sound.
Fridge Control panel
1. Pilot light
2.
ON/OFF switch
3. Temperature regulator (warmest)
4. Temperature indicator
5. Temperature regulator (coldest)
6. Shopping light
7. Shopping switch
8. Minidac light
9. Minidac switch
2.7 Switching on
Insert the plug into the wall socket.
Press the ON/OFF switch .
The Pilot Light will light up.
2.8 Switching off
The fridge is shut off by pressing the ON/
OFF switch until the Pilot light and the
Temperature indicator switched off.
selected.
a long time.
the compartment.
After the temperature has returned to nor-
mal, the Alarm light will continue to flash,
although the buzzer has stopped.
When the Alarm reset switch is pressed,
the warmest temperature reached in the
compartment flashes on the Temperature
indicator .
If the power has been off for a long time,
frozen food should be consumed as
quickly as possible, or cooked and then
re-frozen.
2.6 Action Freeze function
You can activate the Action Freeze func-
tion by pressing the Action Freeze switch.
The Action Freeze light will light up.
This function stops automatically
after 52 hours.
It is possible to deactivate the function at
any time by pressing Action Freeze
switch. The Action Freeze light will switch
off.
1 2 3 4
2.9 Temperature regulation
The temperature can be adjusted be-
tween +2°C and +8°C.
By pressing the Temperature regulators,
the current temperature setting flashes on
the Temperature indicator. It is possible to
modify the setting temperature only with
flashed indicator. To set a warmer tem-
perature, press warmest Temperature
regulator. To set a colder temperature,
press coldest Temperature regulator. The
Temperature indicator displays the newly
selected temperature.
The newly selected-temperature will be
reached after 24 hours.
2.10 Temperature indicator
During normal functioning the Tempera-
ture indicator shows the temperature cur-
rently set.
5 6 7 8 9