Cine Scale (Frames Per Second) - Gossen Metrawatt Digipro F2 Bedienungsanleitung

3.2.7 CINE scale (frames per second)


Select t with the function buttons

Select the desired Cine speed (f.p.s.) by increasing the
shutter speed setting beyond 1/8000 sec. After approx.
1 second the meter switches over to CINE speeds.
The symbol appears on the display. The CINE speeds
can be preset between 8 and 64 frames/second.

Measure by pressing the measuring button M

The measured aperture appears on the left-hand digital display (accuracy: 1/10th stops), and
additionally as a rounded-off mark on the analog aperture scale
The displayed aperture applies to a 180 degrees shutter blade. Enter a COR value in the
function for other shutter blades as an extension factor. V = 180 degrees / open aperture angle.
3.3 Measurements outside the measuring range
The DIGIPRO F2 will not produce any useful readings outside
its measuring range.
If it is too dark or too bright, an E (= Error) appears in the
left-hand digital display, and alongside it
too bright.
18
for too dark, or for
GOSSEN Foto- und Lichtmesstechnik GmbH