Operating Elements; Wall Installation - switel CCT 507 Bedienungsanleitung

Underside
1 Slots for wall installation
2 Base pads
3 Ringer
4 Pivoted supports
for wall installation

Wall installation

The telephone can also be installed on a wall. Use two screws for the
necessary fixation.
Drill two holes 52 mm apart and horizontal to each other and insert the
screws leaving approx. 5 mm projecting from the wall. Guide the slots
(1) in the base of the phone over the two screws protruding from the
wall and slide the phone down a little.
Turn the receiver hook (. Ref. 22, Figure of top side) in the receiver
cradle 180° so that the receiver can be placed on−hook.
Rear side / Right−hand side
1 Slide control
ringing volume
2 Slide control answering machine /
handsfree volume
Warning: Ensure there are no electric lines, water
pipes etc. in the wall where you want to drill holes.

Operating Elements

1
2
3
2
4
1
1
2
2
4
2
65