GGP ITALY SPA MP 84C Gebrauchsanweisung Seite 109

PROBLEM
8. The blades do not engage or do not stop promptly
when they are disengaged
9. Uneven cut and poor grass collection
10. Unusual vibrations while working
11. Uncertain or ineffective braking
12. Erratic forward movement, poor drive when going
uphill or if the machine has
a tendency to rear up
13. With the engine running, the machine does not
move when the drive pedal is pressed
(for hydrostatic drive models)
If problems continue after having carried out these operations, contact your dealer.
WARNING!
Do not take on complicated repair work if you don't have the necessary equipment or the techni
knowledge. The warranty is automatically voided and the manufacturer is not held responsible if repairs are done
badly.
EN 34
LIKELY CAUSE
oblems with engagement mechanism
– cutting deck not parallel to the ground
– blade cuts badly
– forward speed too high compared to the height
of the grass
– collector channel is blocked
– cutting deck is full of grass
– blades are unbalanced or loose
– bolts and screws are loose
– the brake is not adjusted correctly
– problems with the belt or the engagement device
– move the disengagement lever to position «B»
SOLUTION
– contact Your Dealer
– check the tyre pressure ( 5.3.2)
– realign the cutting deck ( 6.3.1)
– contact Your Dealer
– reduce forward speed and/or raise the cutting deck
( 5.4.5)
– wait for the grass to dry
– remove the grass-catcher and empty the collector
channel ( 5.4.7)
– clean the cutting deck ( 5.4.8)
– contact Your Dealer
– check and tighten all the engine and frame bolts
– contact Your Dealer
– contact Your Dealer
– move it to position «A» ( 4.33)
cal