Before Using For The First Time - Bosch BGB45 Serie Gebrauchsanweisung

Innenteil 9000 904 755 A_BGL45123SG 20.06.13 17:43 Seite 13
en
Congratulations on your purchase of a Bosch BGL45
vacuum cleaner.
This instruction manual describes various BGL45 models,
which means that some of the equipment features and
functions described may not be available on your model.
You should only use original Bosch accessories, which
have been specially developed for your vacuum cleaner to
achieve the best possible vacuuming results.
Fold out picture pages.

Before using for the first time

1*
Figure
Push the handle onto the flexible hose until it
engages.
Setting up
2
Figure
a)Push the flexible hose adapter into the opening on
the vacuum cleaner until it engages.
b To remove the flexible hose, press the release button
and pull the hose out.
3*
Figure
a)Connect the handle and the telescopic tube together.
b)Push the handle into the telescopic tube until it
engages.
To release the connection, squeeze the locking collar
and pull the telescopic tube out.
4*
Figure
a)Connect the floor tool and the telescopic tube
together.
b)Push the telescopic tube straight into the
connecting piece of the floor tool until it
engages.
To release the connection, squeeze the locking collar
and pull the telescopic tube out.
5*
Figure
To adjust the length of the telescopic tube, adjust
the adjusting sleeve/sliding switch in the direction of
the arrow and adjust the tube to the required length.
6*
Figure
Attach the accessories holder to the multi-purpose
nozzle and clip it onto the suction pipe/telescopic
tube.
7
Figure
Take the mains plug, pull the mains cable to the
required length and insert the plug into a socket.
8
Figure
Press the ON/OFF button in the direction of the arrow
to switch your vacuum cleaner on.
Vacuuming
9
Figure
The required suction power can be selected infinitely
variably by adjusting the slide control.
Lowest
suction range:
For vacuuming delicate fabrics,
e.g. curtains.
Low
suction range:
For daily vacuuming of lightly soiled floors.
Medium
suction range:
For vacuuming durable floor coverings, hard floors
and for heavily soiled surfaces.
High
suction range:
For vacuuming stubborn dirt and very heavily soiled
surfaces.
10
Figure
Adjusting the floor tool:
a)For vacuuming rugs
and carpets
b For vacuuming
hard floors
Caution!
Floor tools are subject to a certain amount of wear,
depending on the type of hard floors you have
(e.g. rough, rustic tiles). Therefore, you must check
the underside of the floor tool at regular intervals.
Worn undersides of floor tools may have sharp edges
that can damage sensitive hard floors, such as parquet
or linoleum. The manufacturer does not accept any
responsibility for damage caused by worn floor tools.
Turbo brush
If your vacuum cleaner is equipped with a turbo brush,
please consult the accompanying instruction manual
for notes on its use and maintenance.
=>
=>
13