LaserLiner CoatingTest-Master Bedienungsanleitung Seite 30

USB data transfer
16
With the software provided on the CD it is possible to transfer the recorded
data to a PC and to use the data for further processing and documentation.
Load the CD in the drive and follow the installation routine. After successful
installation, start the application. Connect one end of the supplied USB cable
to the mini-USB port of the device and the other end to a free USB port on
your computer.
For further information on how to use the software, refer to the software
manual on the DVD that contains a detailed description of the functions.
2.
1.
3.
Information on maintenance and care
Clean all components with a damp cloth and do not use cleaning agents,
scouring agents and solvents. Remove the battery(ies) before storing for
longer periods. Store the device in a clean and dry place.
Calibration
The meter needs to be calibrated and tested on a regular basis to ensure it
produces accurate measurement results. We recommend carrying out
calibration once a year.
30
EN