Maintenance; Warranty And Repair - Xenteq LBC 512-10S Gebrauchsanweisung

E N

MAINTENANCE

The charger itself doesn't need any specific maintenance. When you want to
clean the housing of the charger, only use a dry cloth or one that is squeezed
dry well.
Important
Check the charge status of the battery charger on a regular basis.
Check the vents on a regular basis.
Check the connection between battery and charger on a regular basis.
Damaged wires should be replaced immediately.
Follow the instructions of the manufacturer for the handling and
maintenance of the battery. CAUTION! A battery contains corrosive
sulphuric acid.

WARRANTY AND REPAIR

Before sending the charger back, always advice the Troubleshooter and other
information in this manual firstly. If a problem could have been solved by means
of this manual, we are obligated to charge the repair/research costs.
In case of a defect, the charger can be brought back to your supplier or it can
be send to the address on the back of this manual. The charger must be send
prepaid. The LBC 500S carries a five-year warranty from selling date. This
warranty only covers the costs of parts and labour for the repair. The warranty
period is only valid when the (copy)purchase ticket is handed over with the
repair. The warranty will lapse when a third party has attempted to repair the
charger or when the LBC 500S is not installed or used in accordance with the
instructions. The
replacement of the input fuse. Do not attempt to repair the charger yourselves.
The manufacturer cannot be hold responsible for the voltage settings or any
damage resulting from use of the LBC 500S.
25
The LBC 500S chargers are marked with the 'Smart Value'
service label of Xenteq. This service label gives you additional
advantages and certainties on service. Read more about this on
our website.
only activities that may carried out yourselves is the