Maintenance; Warranty And Service - Xenteq ProMax 200 Gebrauchsanweisung

EN
AC C ESSORI ES
Temperature sensor BTC 100
The optional temperature sensor BTC 100 measures the temperature of the
battery during the entire charging process. Depending on the temperature
measured the end voltage is compensated. Important: this compensation must
be activated. See the chapter 'Setting the charge program'.
M AI NTENANC E
The charger itself doesn't need any specific maintenance. When cleaning the
housing, use a (squeezed) dry cloth. Remove any filth and dust from the
ventilation openings of the charger. Follow the instructions of the manufacturer
when using and handling the battery.
sulphuric acid.
Important
▪ Check the charge status of battery charger on a regular basis.
▪ Check the cables and connection between the charger and battery
regularly and clean contaminated connections.
▪ Check the ventilation vents and fan on a regular basis.
▪ Check the degree of acidity of a non-maintenance free battery regularly.
W ARRANTY AND SERVIC E
Before sending the charger back, always advice the Trouble Shooter and other
information in this manual firstly. If a problem could have been solved by means
of this manual, we are obligated to charge the repair/research costs.
In case of a malfunction, the charger can be brought back to your supplier or it
can be send to the address on the back of this manual. The charger must be
send prepaid. The ProMax 200 carries a five-year warranty from selling date.
This warranty only covers the costs of parts and labour for the repair. The
warranty period is only valid when the (copy)purchase ticket is handed over with
the repair. The warranty will lapse when a third party has attempted to repair
the charger or when the ProMax 200 is not installed or used in accordance with
the instructions. The only activities that may carried out yourselves is the
replacement of the input fuse. Do not attempt to repair the charger yourselves.
The manufacturer cannot be hold responsible for the (suggested) charge settings
or any damage resulting from use of the Promax 200.
29
CAUTION! A battery contains corrosive
The ProMax 200 chargers are marked with the Smart
Value service label of Xenteq. This service label gives you
additional advantages and certainties on service. Read
more about this on our website.