Two-Touch Memory - AGFEO T 15 Bedienungsanleitung

Two-Touch Memory

Besides the One-Touch Memory, the AGFEO T 15 is also equipped with 10 Two-Touch
Memory banks.
Storing a number
- Press STORE button (
- Enter the desired phone number. You may enter * or # buttons into the dialling
sequence just like the way you usually make calls to the desired phone number
after you have picked up the handset. If your phone is connected behind a PABX
switching system, you may enter a pause by pressing PAUSE button (
the dialling sequence to insert a timed delay when necessary.
- Press STORE button (
- Press a numbered button from 0 to 9 to select a memory bank location until the
display shows "SAVE OK". Then press CALL BACK button (
to standby.
Deleting a number
To delete a number from the Two-Touch Memory, you have to overwrite the Position with a
blank.
Dialling a number
To make a call with the Two-Touch Memory, simply press and hold the desired numbered
button from 0 to 9 until the display shows the stored number. Then lift the handset or press
SPEAKER button (
Note
The maximum number of digits to be entered is 20. If the number exceeds 20 digits,
the display will show "TOO LONG" and the exceeding digits will not be stored.
E - 10
) once and the display shows "-->" .
) once again, "-->?" will appear on the display.
). The number will dial out automatically.
) into
) twice to go back