Positioning And Levelling - AEG LP5682 Benutzerinformation

8 www.aeg.com
We recommend that you
keep the packaging and the
transit bolts for any
movement of the appliance.

3.2 Positioning and levelling

1. Install the appliance on a flat hard
floor.
Make sure that carpets do
not stop the air circulation
below the appliance.
Make sure that the
appliance does not touch
the wall or other units.
2. Loosen or tighten the feet to adjust
the level.
WARNING!
Do not put cardboard, wood
or equivalent materials
below the appliance feet to
adjust the level.
The appliance must be level and stable.
3.3 The inlet hose
1. Connect the water inlet hose to the
back of the appliance.
2. Position it toward left or right
depending on the position of the
water tap.
x4
3. If necessary, loose the ring nut to set
it in the correct position.
A correct adjustment of the
appliance level prevents the
vibration, noise and the
movement of the appliance
when in operation.
When the machine is
installed on a plinth or if a
washer dryer is stacked on
the washing machine, use
the accessories described in
chapter 'Accessories'. Read
carefully the instructions
supplied with the appliance
and with the accessory.
O O
20 20
Make sure that the inlet hose
is not in vertical position.
O O
45 45