Technical Data; Installation - Electrolux ST23012 Benutzerinformation

Technical data

Dimension
Rising Time
The technical information are situated in the
rating plate on the internal left side of the ap-
pliance and in the energy label.

Installation

Read the "Safety Information" carefully
for your safety and correct operation of
the appliance before installing the
appliance.
Positioning
Install this appliance at a location where the
ambient temperature corresponds to the cli-
mate class indicated on the rating plate of the
appliance:
Climate Ambient temperature
class
SN +10°C to + 32°C
N +16°C to + 32°C
ST +16°C to + 38°C
T +16°C to + 43°C
Rear spacers
In the bag with the documentation, there are
two spacers which must be fitted as shown
in the figure.
1. Fit the spacers into the holes. Make sure
that the arrow (A) is positioned as shown
in the picture.
Height
Width
Depth
2. Turn counter-clockwise the spacers
Levelling
When placing the appliance ensure that it
stands level. This can be achieved by two
adjustable feet at the bottom in front.
1404 mm
545 mm
604 mm
19 h
through 45° until they lock into place.
electrolux 51