Mounting The Clamping Ring - Clearaudio TT5 Bedienungsanleitung

2. Mounting the clamping ring

Note: If you already have an aluminum clamping ring, or a round base with a hole of 24.85 mm
diameter, mounted on your Clearaudio turntable please skip to step 3.
Mounting the clamping ring on a Clearaudio turntable:
Mount the aluminum clamping ring on the arm board or turntable chassis (as appropriate) using
the three allen bolts (M4 x 10) and the 3mm allen key supplied.
Take time to ensure mounting surfaces are perfectly level.
Pic. 2: Mounting the clamping ring
Pic. 3: Screwing in the bolts
Please screw in all three bolts firmly (see Picture 3).
© clearaudio electronic GmbH 2016
TT5
User manual /
Bedienungsanleitung
Seite / Page 5