Technical Specifications - Omnitronic DD-4750 Bedienungsanleitung

6 After replacing the phono cartridge system, readjust the stylus pressure and the anti-skating value
(chapters 5.3 and 5.4).
Fig. 11: Adjusting the azimuth
10.2 Replacement headshell
A replacement headshell (e. g. the headshell S-15 from OMNITRONIC) including a phono cartridge system
allows an immediate replacement, if required. The headshell can easily be replaced by unscrewing the
existing one and screwing on the new one. After the replacement readjust the stylus pressure and the anti-
skating value (chapters 5.3 and 5.4).

11. TECHNICAL SPECIFICATIONS

Power supply:
Power consumption:
Type:
Drive method:
Motor:
Turntable platter:
Speed:
Change time between speeds:
Initial torque:
Start time:
Brake:
Stop time:
Pitch adjustment:
Wow and flutter:
Rumble:
Tone arm:
Tone arm length:
Overhang:
Anti-skating range:
Stylus pressure range:
Applicable cartridge weight:
Phono output level:
Line output level:
Frequency range:
Channel separation:
Output connectors:
Dimensions:
Weight:
Please note: Every information is subject to change without prior notice. 08.12.2008 ©
115/230 V AC, 60/50 Hz ~
13.5 W
manual turntable
quartz-controlled direct drive
brushless DC motor
Ø 330 mm, aluminum diecast
33⅓ RPM, 45 RPM and 78 RPM
<0.3 sec
>3.5 kg/cm
<0.3 sec
electronic brake
<0.3 sec
±10 %, ±20 %, ±50 %
<0.1 %
55 dB DIN B
S-shape with Cardan's suspension
230 mm
15 mm
0-4 g
3-4 g
6-10 g
1.5-3.6 mV/ 1 kHz 5 cm/sec
90-216 mV/ 1 kHz 5 cm/sec
50 Hz - 20 kHz
>15 dB
RCA, USB type B
449 x 370 x 145 mm
9.8 kg
28/28 00042136.DOC, Version 1.0