Cleaning And Maintenance - Velleman CS200 Bedienungsanleitung

6.

Cleaning and Maintenance

Your CS200 metal detector is an example of superior design and craftsmanship. The following
suggestions will help you take care of your metal detector so you can enjoy it for years.
Handle the detector gently and carefully. Dropping it can damage circuit boards and cases and
can cause the detector to work improperly.
Use the detector only in normal temperature environments. Temperature extremes can shorten
the life of electronic devices, or damage the detector's exterior.
Keep the detector away from dust and dirt, which can cause premature wear of parts.
Wipe the detector with a damp cloth occasionally to keep it looking new. Do not use harsh
chemicals, cleaning solvents or strong detergents to clean the detector.
Use this device with original accessories only. Velleman nv cannot be held responsible in the
event of damage or injury resulting from (incorrect) use of this device. For more info
concerning this product and the latest version of this manual, please visit our website
www.velleman.eu. The information in this manual is subject to change without prior notice.
R&TTE Declaration of Conformity
Hereby, Velleman NV declares that the radio equipment type [CS200] is in compliance with Directive
1999/5/EC.
The full text of the EU declaration of conformity is available at the following internet address:
www.velleman.eu.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part
of this manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise
without the prior written consent of the copyright holder.
V. 03 – 06/01/2016
CS200
7 ©Velleman nv