Tool Overview; Safety Precautions - Storch Quick Mixx 25 Bedienungsanleitung

Tool overview

2
1

Safety Precautions

Look for this symbol to point out important safety precautions. It means ATTENTION!
Your safety is involved.
Please read and observe all operating and safety instructions. Before starting up the device please read the
operating instructions in full to ensure safe operation. Observe all safety advice, and dangers and warnings.
Only use the tool for the use for which it is designed. Failure to observe these instructions can damage the
device or lead to injury. Do not alter the tool in any way.
Check the tool before each use.
- Check moving parts are properly connected
- Switch the on/off switch to off before plug ging in
- Check to ensure no cables are damaged.
- Check to ensure there are no broken parts.
Handle with care. Keep the tool clean to ensure optimum safety and performance.
- Never use near flammable liquids, steam or gas.
- Protect from damp and rain.
- Never clean the unit using water!
- During use, make sure that no liquids are sprayed against the unit.
- Never put the unit into operation if you have wet / moist hands.
During operation
There may be dust when mixing dry goods. For health and safety reasons the working area should be well ventilated and
the user should always wear a mask and safety goggles. Please observe the safety instructions issued by the material
producer.
Do not wear wide clothes, scarves or jewellery (rings, watches). These could get caught up in the moving parts. Wear
protective gloves.
4
No.
1
2
3
4
5
3
No picture
5
43
Parts name
Gear selector switch (for Quick Mixx 50)
On/off switch with stop
Tool holder
Speed adjuster
Mixing coil (optional)
Assembly key (supplied)