Pump System Tubing Flow Rates - Masterflex 77120-30 Bedienungsanleitung

APPENDIX A
CAUTION: Tubing for use with the MASTERFLEX® C/L® Pump Systems is Microbore Autoanalysis Tubing.
Use of tubing other than that specified will result in poor pumping performance and/or
pump system damage and voiding of applicable warranty.
Available Microbore Autoanalysis Tubing
TYGON — Catalog prefix number 95609-XX available
in sizes 10 through 48.
TYGON LFL — Catalog prefix number 96429-XX available
in sizes -18, -26, -30, -34, -42 and -48.
Silicone (peroxide-cured) — Catalog prefix number
07625-XX available in sizes 22 through 48.
Silicone (platinum-cured) — Catalog prefix number
95612-XX available in sizes 22 through 48.
PHARMED ® — Catalog prefix number 95709-XX
available in sizes -12, -18, -26, -32, -36, -40, -44 and -48.
VITON ® fluoroelastomer — Catalog prefix number
07632-XX available in sizes -26, -30, -34, -38, -42, -46 and -48.
See the following table for Tubing size versus ID and
flow rates. Flow rates are for water pumped at room
temperature and 0 psi. Flow rates for silicone tubing are
approximately 25%–50% less than listed.
Flow rate is determined by drive, speed, tubing size
and material.
Printed in U.S.A.
083102
10
Tubing Tubing
Suffix. ID
in (mm)
-10 0.008 (0.19)
-12 0.010 (0.25)
-14 0.015 (0.38)
-16 0.017 (0.44)
-18 0.020 (0.51)
-22 0.025 (0.64)
-24 0.030 (0.76)
-26 0.035 (0.89)
-28 0.040 (1.02)
-30 0.045 (1.14)
-32 0.051 (1.30)
-34 0.056 (1.42)
-36 0.060 (1.52)
-38 0.065 (1.65)
-40 0.073 (1.85)
-42 0.081 (2.06)
-44 0.090 (2.29)
-46 0.100 (2.54)
-48 0.110 (2.79)
All flow rates based on pumping water @ 0 psig 70°F (21°C).
Flow Rate
200 rpm 60 rpm 6 rpm
(µL/min) (µL/min) (µL/min)
400 128 13
610 178 17
1290 378 45
1673 490 55
2280 698 70
3630 1110 105
5180 1580 150
7160 2110 205
8980 2680 270
10950 3290 335
14120 4130 420
16800 4900 495
18700 5510 555
21200 6330 630
24890 7650 750
28090 8910 875
31210 10160 1015
34160 11340 1170
36720 12340 1330
™