Package Contents; Troubleshooting - Clarion CC720 Installationshandbuch

Package contents

4. TROUBLESHOOTING

The following symptoms are not malfunctions. Before having the unit serviced, check the
following points once more.
Symptom
No image
Poor image is
produced
No audio
output
4
CC720
➀
➁
➂
➃
➄
Reason
Wiring is incomplete or
disconnected.
A fuse is burned out.
The lens cover is soiled.
Sunlight or headlights from
vehicle in the rear are shining
directly in camera.
The environmnet is too dark.
Poor connection.
Camera with attached Mounting Bracket (A)
(universal mounting) and 7.0 m cable ................... 1
Mounting Bracket (B)
(for use with CAU001/CAU002) ............................ 1
Pan head screw M3 x 4 with washers
(for use with Bracket B) ......................................... 2
Pan head screw M3 x 16 with washers
(for use with Bracket B) ......................................... 2
Owner's and Installation manual ........................... 1
Solution
Check wirring once again and confirm correct
connections.
When using an independent power supply box,
check the fuse and, if burned out, replace with a
new one with theh same apacity (1A). If the fuse
burns out repaetedly, consult your dealer or
nearest Clarion Service Center.
Wipe lightly with a damp soft cloth. Do not rub
harshly with dry cloths since scratches may be
produced.
The image will return to normal when the light
striking the lens is removed.
The image maybe poor under dark and low light
conditions. The image will improve under normal
light conditions.
Push the camera connector tighter
into the vehicle side connector.