Package Contents; Troubleshooting - Clarion CC520 Bedienungs- Und Installationshandbuch

Package contents

4. TROUBLESHOOTING

The following symptoms are not malfunctions. Before having the unit serviced, check the
following points once more.
Symptom Reason
No image Wiring is incomplete or
disconnected.
A fuse is burned out.
Poor image The lens cover is soiled.
is produce
Sunlight or headlights
from vehicle in the rear are
shining directly in camera.
The environment is too dark.
4
CC520
Camera with attached Mounting Bracket
➀
(A)(universal mounting) and 7.0 m cable.............. 1
Mounting Bracket (B)
➁
(for use with CAU001/CAU002) ............................ 1
Pan head screw M3 x 4 with washers
➂
(for use with Bracket B) ......................................... 2
Pan head screw M3 x 16 with washers
➃
(for use with Bracket B) ......................................... 2
Owner's and Installation manual ........................... 1
➄
Solution
Check wiring once again and confirm correct
connections.
When using an independent power supply box,
check the fuse and, if burned out, replace with
a new one with the same capacity (1A). If the
fuse burns out repeatedly, consult your dealer or
nearest Clarion Service Center.
Wipe lightly with a damp soft cloth. Do not rub
harshly with dry cloths since scratches may be
produced.
The image will return to normal when the light
striking the lens is removed.
The image display will be poor at night or dim.
The image will return to normal in conditions of
brighten illumination.