Bdc2010 General Operating Instructions - Caframo BDC2002 Bedienungshinweise

BDC2010 General Operating Instructions

Make sure the stirrer is securely mounted as specified in the installation instruc-
tions. Ensure the mixing paddle or impeller is securely attached to the desired
position.
The stirrer is now ready for use to mix liquids and liquid/solid solutions. Appro-
priate impeller and container specifications must be determined by the operator,
ensuring that all safety instructions are followed.
Keypad Functions
Power Button - Turns the stirrer on and off.
Multi-Function Button - Sets three parameters - speed (rpm), count-
down timer (minutes) and xRx agitation (seconds)
Increase Button - Increases the speed by one rpm or the countdown
timer by one minute or the xRx agitation by one second.
Decrease Button - Decreases the speed by one rpm or countdown
timer by one minute or the xRx agitation by one second.
Reverse - Reverses the direction that the impeller is turning. The impel-
ler turns clockwise by default.
Start/Pause Button - Allows the stirrer to be paused and started again.
Use this button to start the stirrer when ready.
Light Power Button - Turns the light on and off. The stirrer must be
plugged in for the light to function.
Four Digit LED Display - Displays either the speed (rpm), countdown
timer (minutes) or xRx agitation (seconds). The four decimal points are
used to indicate the following parameters. These do not act as numeric
decimal points.
j  
j
Indicator that speed is displayed.

Indicator that time is displayed.

Indicator that cycle time is displayed.
Indicator that stirrer is turning counter clockwise.
• During set-up the indicator light is solid. When the stirrer is running, the indica-
tor light flashes.
10