Countdown-Timer - Caframo BDC2002 Bedienungshinweise

Clockwise Stirring
Turn the stirrer on by pressing the power button. The display will read 40 rpm and
the speed indicator light will be illuminated. Increase to the desired speed and
press the start/pause button. The stirrer will start turning in a clockwise direction.
The speed indicator light in the display will flash and the set speed in rpm will be
displayed.
Counter Clockwise Stirring
Set up by following the clockwise stirring instructions above. Press the reverse
button. The reverse button can be pressed while the stirrer is running to start the
stirrer in a counter clockwise direction. The indicator light above the reversing icon
will be illuminated when the stirrer is turning in a counter clockwise direction.
Countdown Timer
Turn the stirrer on by pressing the power button. Set the desired speed by pressing
the "+" button. Press the multifunction button until the indicator light for time is il-
luminated. A "0" will appear in the display. Press the "+" to set the countdown timer
in minutes. Press the start/pause button to start. Stirring will start. Time or speed
can be displayed. If time is selected, the minutes remaining are displayed. Press
the multifunction button to display speed. To stir in the opposite direction, press
the reverse button. Stirring stops when time is completed. Three beeps will sound.
xRx Agitation Cycle
Turn the stirrer on by pressing the power button. Set speed as above and count-
down timer if desired. Press the multifunction button once more until the indicator
light for cycle is illuminated. A "0" will appear in the display. Press the "+" to set
the number of seconds the impeller will rotate in one direction before changing
directions. Press the start/pause button.
For example: If set for 5 seconds the stirrer impeller will turn clockwise for 5
seconds at the set speed then stop and change to turn counter clockwise for 5
seconds. This mixing pattern will continue until the pause button is pressed or until
the time is completed (if set).
The display will show the cycle seconds counting down during each direction un-
less speed or the countdown timer is selected.
When the stirrer is powered on, the default speed is 40 rpm, countdown timer is 0
minutes, and the xRx agitation cycle is 0 seconds.
If the stirrer is kept powered on it will remember the original values set for speed,
the countdown timer and the xRx agitation cycle so that when the start/pause but-
ton is pressed again the operations will repeat.
Speed can be changed (increased or decreased) while the stirrer is running. Press
the multifunction button so the speed is displayed. Increase or decrease speed by
pressing the "+" or "-" buttons.
11