Commissioning; Normal Operation - Rk Compact Montageanleitung

7. Life Phases
7.2.6 Coupling installation
Coupling installation - pin versions with / without feather key
•
Push the coupling lug on to the pin
•
Observe the plug-in depth at the lug
•
Tighten the clamping screw

7.3 Commissioning

Only persons who have read and understood these assembly instructions completely may put the
unit into service.
The function of this linear unit results in forces that can lead to personal injury or property dama-
ge.
It is imperative that you observe the safety regulations and the limits of the linear unit.

7.3.1 Normal operation

Check the linear unit when in operation regularly for correct performance of its function.
During normal operation, look out for obvious changes in the incomplete machine. Should faults
arise, the linear unit is to be shut down immediately in order to avoid damage.
The operating instructions for the complete machine in accordance with Machinery Directive
2006/42/EC are binding for the linear unit as part of a complete machine.
44