Installation With Fixings - Rk Compact Montageanleitung

7. Life Phases

7.2.3 Installation with fixings

The specific tightening torques for the bolts used must be observed for all assembly work. Note
the strength of the screws and separate information for accessories supplied. Only compliance
with the conditions guarantee the safety and long working life of the linear shaft. Take the values
from the table in these instructions.
Clamping rail fixing elements
This linear unit can be fixed to a suitable base with RK clamping rails. The RK clamping rails are
placed against the lower, lateral profile grooves, positioned and secured to the prepared base.
Combination bracket fixing elements
This linear unit is used with the RK combination bracket for establishing a 2 axis combination that
is less than 45° and 90°.
The RK combination angle is centred via the V groove in the guide rail and secured.
41