Guidance Concept; Dimensions; Basic Lengths / Weights - Rk Compact Montageanleitung

6. Product Information

6.2.2 Guidance concept

Aluminium guides rails on steel guide shafts
Guide shaft
After receiving this linear unit, check the device for possible damage and missing components. If
you find any faults, inform RK Rose+Krieger GmbH of these immediately. The linear unit is deli-
vered ready for operation, but without a control system and without accessories.

6.3 Dimensions

Linear units are produced individually to length in accordance with your specification. The width
and height of this linear unit is determined from the choice of size and design and can be taken
from the Linear Components catalogue.

6.3.1 Basic lengths / weights

Version with spindle drive, right or left-hand thread
Version Basic length in mm
RK Compact 30
RK Compact 50
RK Compact 80
RK Compact 120
Version with right or left-hand thread with track guide tapped drive
Version Basic length in mm
RK Compact 80
RK Compact 120
Version with right and left-hand thread with track guide tapped spindle
Version Basic length in mm
RK Compact 30
RK Compact 50
RK Compact 80
RK Compact 120
36
Guide slides
Guide profile
max. stroke in mm
59
95
144
204
max. stroke in mm
144
204
max. stroke in mm
104
170
264
384
Weight in kg
Basic length
130 0.08
350 0.29
350 0.99
400 2.76
Weight in kg
Basic length
199 0.99
199 2.76
Weight in kg
Basic length
85 0.13
275 0.29
230 0.99
220 2.76
Guide shaft
Weight in kg
per 100 mm travel
0.07
0.18
0.33
0.67
Weight in kg
per 100 mm travel
0.33
0.67
Weight in kg
per 100 mm travel
0.08
0.18
0.33
0.67