Installing The Optional Accessories - Rk Compact Montageanleitung

7. Life Phases
Combination plate fixing elements
The RK combination plate allows drilling patterns to be made for fastening assemblies.
A size and the offset of the axis by 90° is permitted in combination with the RK combination brac-
ket.

7.2.4 Installing the optional accessories

Mechanical or inductive limit switches
The technical specifications for limit switches can be found in the catalogue. Ensure that the wi-
ring is safely laid out during installation. Avoid damage to the wiring, for example by having radii
that are too small. This can lead to failure of the system. The wiring must not be in the path tra-
velled by the linear unit.
Inductive limit switch
The limit switch is installed at its position on the guidance
section of the linear shaft with a support plate. The fixing kit
is enclosed with the part.
42