E+E Elektronik HUMIPORT 10 Bedienungsanleitung Seite 27

Manual HUMIPORT 10/20 english
AutoOff: The AutoOff function enables the user to define and set
a period of time (in minutes) for the instrument to automatically
switch off. The OFF function (<1) deactivates the automatic switch off.
Select with and ; enter with .
One point calibration of temperature and relative humidity
CAL1: CAL1 (one point calibration) gives the user the possibility to
set an offset for sensor 1 (temperature). The offset value appears
at the bottom of the display. Max. +/- 10°C or. +/- 10°F can be set.
Factory calibration can be obtained by entering offset 0.0
page 27