Inhaltsverzeichnis - KEENCUT OVAL 6 Bedienungshandbuch

1
2 Packing list
2.1
3 Assembly
3.1
3.2
3.3
4 Operation
4.1
4.2
4.3
4.4
4.5
4.6
5 The Craftsman Toolset (optional)
5.1
5.2
5.3
5.4
5.5
6 Looking After Your Oval 6
6.1
Introduction
Thank you for choosing a Keencut Oval 6. Every effort has been made to bring you a
superbly built product with the promise of many years of good service. Please read
these instructions carefully in order to obtain maximum benefit from your machine and
remember, in case of difficulties ask your distributor or Keencut Limited for assistance.
Once familiar with the many functions of the Oval 6 and the advantages of the unique
turntable system, your own creativity will enable you to produce very satisfying and
individual work that is the hallmark of the successful framer.
Contents
Unpacking your machine
Fitting the Beam and Cutting Head
Fitting the Turntable
Fitting the Clamp Bars
Setting the size of the oval/circle
Setting the blade depth and using the Clamps
Cutting an oval/circle
Calibrating the Scales
The Centre Pointer
Cutting small ovals and circles
Embossing
Penlining
Cutting V-grooves
Cutting glass ovals/circles
Cutting glass ovals/circles (Cont'd)
Maintenance & Blades
1